GoldenLine
Zaloguj się

konto usunięte

Temat: debian 2.6.25-2-amd64 i dyski IDE

pewnie problem jest tak prymitywny ze szkoda na to tematu, ale

Mam dwa jaderka :P Dzieki bogu

2.6.24-1-amd64 fdisk -l pokazuje wszystkie dyski (3 Sata i 2 IDE)

jak sie loguje na 2.6.25-2-adm64 fdisk -l pokazuje tylk dyski Sata

i teraz pytanie. Co dodac ??Rafal "Rudy" S. edytował(a) ten post dnia 01.08.08 o godzinie 23:39
Link do wypowiedziLink
Tomasz Grzelak

Tomasz Grzelak Data Networking
Specialist, Amway
Business Centre
Europe

Temat: debian 2.6.25-2-amd64 i dyski IDE

pierwsze, co bym zrobił, to lsmod dla obu kerneli i porównałbym, czy nie brakuje jakiego modułu w systemie pracującym na jądrze, spod którego nie widzisz tego dysku IDE (moduł do obsługi IDE załadowany?)

pzdr.
Link do wypowiedziLink

konto usunięte

Temat: debian 2.6.25-2-amd64 i dyski IDE

Rafal "Rudy" S.:
pewnie problem jest tak prymitywny ze szkoda na to tematu, ale

Mam dwa jaderka :P Dzieki bogu

2.6.24-1-amd64 fdisk -l pokazuje wszystkie dyski (3 Sata i 2 IDE)

jak sie loguje na 2.6.25-2-adm64 fdisk -l pokazuje tylk dyski Sata

i teraz pytanie. Co dodac ??Rafal "Rudy" S. edytował(a) ten post dnia 01.08.08 o godzinie 23:39
Gdybyś mógł dmesga zamieścić.
Link do wypowiedziLink

konto usunięte

Temat: debian 2.6.25-2-amd64 i dyski IDE

Marcin Bojko:
Gdybyś mógł dmesga zamieścić.
troche dlugo bedzie

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.25-2-amd64 (Debian 2.6.25-7) (maks@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Mon Jul 14 11:05:23 UTC 2008
[ 0.000000] Command line: root=/dev/sda8 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff70000 (usable)
[ 0.000000] BIOS-e820: 00000000cff70000 - 00000000cff7e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cff7e000 - 00000000cffd0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 851824) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used
[ 0.000000] end_pfn_map = 1245184
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000FAF00, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT CFF70000, 0040 (r1 A_M_I_ OEMRSDT 6000825 MSFT 97)
[ 0.000000] ACPI: FACP CFF70200, 0084 (r2 A_M_I_ OEMFACP 6000825 MSFT 97)
[ 0.000000] ACPI: DSDT CFF70440, 963E (r1 A0986 A0986000 0 INTL 20060113)
[ 0.000000] ACPI: FACS CFF7E000, 0040
[ 0.000000] ACPI: APIC CFF70390, 006C (r1 A_M_I_ OEMAPIC 6000825 MSFT 97)
[ 0.000000] ACPI: MCFG CFF70400, 003C (r1 A_M_I_ OEMMCFG 6000825 MSFT 97)
[ 0.000000] ACPI: OEMB CFF7E040, 0081 (r1 A_M_I_ AMI_OEM 6000825 MSFT 97)
[ 0.000000] ACPI: HPET CFF79A80, 0038 (r1 A_M_I_ OEMHPET 6000825 MSFT 97)
[ 0.000000] ACPI: OSFR CFF79AC0, 00B0 (r1 A_M_I_ OEMOSFR 6000825 MSFT 97)
[ 0.000000] ACPI: SSDT CFF7E5D0, 0A7C (r1 DpgPmm CpuPm 12 INTL 20060113)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000130000000
[ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 851824) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [000000000000e000 - 0000000000014fff]
[ 0.000000] bootmap [0000000000015000 - 000000000003afff] pages 26
[ 0.000000] early res: 0 [0-fff] BIOS data page
[ 0.000000] early res: 1 [6000-7fff] SMP_TRAMPOLINE
[ 0.000000] early res: 2 [200000-63d2f7] TEXT DATA BSS
[ 0.000000] early res: 3 [37910000-37fefa8a] RAMDISK
[ 0.000000] early res: 4 [9dc00-a0bff] EBDA
[ 0.000000] early res: 5 [8000-dfff] PGTABLE
[ 0.000000] [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
[ 0.000000] [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
[ 0.000000] [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
[ 0.000000] [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
[ 0.000000] [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
[ 0.000000] [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
[ 0.000000] [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
[ 0.000000] [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
[ 0.000000] [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
[ 0.000000] [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
[ 0.000000] [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
[ 0.000000] [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
[ 0.000000] [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
[ 0.000000] [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
[ 0.000000] [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0
[ 0.000000] [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0
[ 0.000000] [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0
[ 0.000000] [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0
[ 0.000000] [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0
[ 0.000000] [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0
[ 0.000000] [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0
[ 0.000000] [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810006600000 on node 0
[ 0.000000] [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810006a00000 on node 0
[ 0.000000] [ffffe20003800000-ffffe200039fffff] PMD ->ffff810006e00000 on node 0
[ 0.000000] [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810007200000 on node 0
[ 0.000000] [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810007600000 on node 0
[ 0.000000] [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810007a00000 on node 0
[ 0.000000] [ffffe20004000000-ffffe200041fffff] PMD ->ffff810007e00000 on node 0
[ 0.000000] [ffffe20004200000-ffffe200043fffff] PMD ->ffff810008200000 on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1245184
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0 -> 157
[ 0.000000] 0: 256 -> 851824
[ 0.000000] 0: 1048576 -> 1245184
[ 0.000000] On node 0 totalpages: 1048333
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1099 pages reserved
[ 0.000000] DMA zone: 2842 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833448 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cff70000 - 00000000cff7e000
[ 0.000000] PM: Registered nosave memory: 00000000cff7e000 - 00000000cffd0000
[ 0.000000] PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ee00000)
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PERCPU: Allocating 35096 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030210
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda8 ro quiet
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000001] time.c: Detected 2999.659 MHz processor.
[ 0.002091] Console: colour VGA+ 80x25
[ 0.002093] console [tty0] enabled
[ 0.002110] Checking aperture...
[ 0.002116] Calgary: detecting Calgary via BIOS EBDA area
[ 0.002117] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.002118] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.004000] Placing software IO TLB between 0x8421000 - 0xc421000
[ 0.004000] Memory: 4056084k/4980736k available (2184k kernel code, 137248k reserved, 1012k data, 372k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] hpet clockevent registered
[ 0.080006] Calibrating delay using timer specific routine.. 6003.28 BogoMIPS (lpj=12006575)
[ 0.080035] Security Framework initialized
[ 0.080038] SELinux: Disabled at boot.
[ 0.080040] Capability LSM initialized
[ 0.080281] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.081710] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.082359] Mount-cache hash table entries: 256
[ 0.082459] Initializing cgroup subsys ns
[ 0.082462] Initializing cgroup subsys cpuacct
[ 0.082475] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.082476] CPU: L2 cache: 6144K
[ 0.082478] CPU 0/0 -> Node 0
[ 0.082479] CPU: Physical Processor ID: 0
[ 0.082480] CPU: Processor Core ID: 0
[ 0.082485] CPU0: Thermal monitoring enabled (TM2)
[ 0.082486] using mwait in idle threads.
[ 0.083112] ACPI: Core revision 20070126
[ 0.139398] Using local APIC timer interrupts.
[ 0.140009] APIC timer calibration result 20830944
[ 0.140010] Detected 20.830 MHz APIC timer.
[ 0.140108] Booting processor 1/2 APIC 0x1
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5999.29 BogoMIPS (lpj=11998595)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 6144K
[ 0.004000] CPU 1/1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.004000] Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 06
[ 0.228762] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.232047] Brought up 2 CPUs
[ 0.232110] CPU0 attaching sched-domain:
[ 0.232111] domain 0: span 00000003
[ 0.232112] groups: 00000001 00000002
[ 0.232114] domain 1: span 00000003
[ 0.232115] groups: 00000003
[ 0.232117] CPU1 attaching sched-domain:
[ 0.232118] domain 0: span 00000003
[ 0.232118] groups: 00000002 00000001
[ 0.232120] domain 1: span 00000003
[ 0.232121] groups: 00000003
[ 0.232299] net_namespace: 1016 bytes
[ 0.232302] Booting paravirtualized kernel on bare hardware
[ 0.232428] NET: Registered protocol family 16
[ 0.232551] ACPI: bus type pci registered
[ 0.232607] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[ 0.232634] PCI: Not using MMCONFIG.
[ 0.232659] PCI: Using configuration type 1
[ 0.236674] ACPI: EC: Look up EC in DSDT
[ 0.245215] ACPI: Interpreter enabled
[ 0.245217] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.245229] ACPI: Using IOAPIC for interrupt routing
[ 0.245369] ACPI: Error attaching device data
[ 0.245420] ACPI: Error attaching device data
[ 0.245470] ACPI: Error attaching device data
[ 0.245523] ACPI: Error attaching device data
[ 0.251833] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.253057] PCI: Transparent bridge - 0000:00:1e.0
[ 0.253083] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.253239] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 0.253311] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.253415] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.253486] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.253558] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.253641] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.268810] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.268904] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.268997] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.269091] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.269184] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.269279] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.269372] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.269465] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.269572] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - BF, should be B6 [20070126]
[ 0.269597] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.269614] pnp: PnP ACPI init
[ 0.269619] ACPI: bus type pnp registered
[ 0.269737] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.269746] 00:01: calling quirk 0xffffffff8035ba3a: quirk_system_pci_resources+0x0/0x173()
[ 0.269777] pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.269841] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.269874] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.269903] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.269933] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.270422] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.270517] 00:07: calling quirk 0xffffffff8035ba3a: quirk_system_pci_resources+0x0/0x173()
[ 0.270548] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.270694] 00:08: calling quirk 0xffffffff8035ba3a: quirk_system_pci_resources+0x0/0x173()
[ 0.270725] pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.270879] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.271016] pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.271084] 00:0b: calling quirk 0xffffffff8035ba3a: quirk_system_pci_resources+0x0/0x173()
[ 0.271116] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.271575] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.271714] 00:0d: calling quirk 0xffffffff8035ba3a: quirk_system_pci_resources+0x0/0x173()
[ 0.271746] pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.271891] 00:0e: calling quirk 0xffffffff8035ba3a: quirk_system_pci_resources+0x0/0x173()
[ 0.271926] pnp 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.272123] 00:0f: calling quirk 0xffffffff8035ba3a: quirk_system_pci_resources+0x0/0x173()
[ 0.272161] pnp 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.272410] pnp: PnP ACPI: found 16 devices
[ 0.272411] ACPI: ACPI bus type pnp unregistered
[ 0.272522] usbcore: registered new interface driver usbfs
[ 0.272557] usbcore: registered new interface driver hub
[ 0.272584] usbcore: registered new device driver usb
[ 0.272670] PCI: Using ACPI for IRQ routing
[ 0.272671] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.292047] PCI-GART: No AMD northbridge found.
[ 0.292051] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.292055] hpet0: 4 64-bit timers, 14318180 Hz
[ 0.293075] ACPI: RTC can wake from S4
[ 0.304042] pnp: the driver 'system' has been registered
[ 0.304052] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.304054] system 00:01: driver attached
[ 0.304060] system 00:07: ioport range 0x290-0x29f has been reserved
[ 0.304062] system 00:07: driver attached
[ 0.304066] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.304069] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.304071] system 00:08: ioport range 0x500-0x57f has been reserved
[ 0.304073] system 00:08: iomem range 0xfed08000-0xfed08fff has been reserved
[ 0.304076] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.304078] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.304081] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
[ 0.304082] system 00:08: driver attached
[ 0.304088] system 00:0b: iomem range 0xffc00000-0xffdfffff has been reserved
[ 0.304089] system 00:0b: driver attached
[ 0.304094] system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.304097] system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.304099] system 00:0d: driver attached
[ 0.304103] system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.304105] system 00:0e: driver attached
[ 0.304109] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 0.304112] system 00:0f: iomem range 0xc0000-0xcffff has been reserved
[ 0.304115] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 0.304118] system 00:0f: iomem range 0x100000-0xcfffffff could not be reserved
[ 0.304120] system 00:0f: iomem range 0x0-0x0 could not be reserved
[ 0.304122] system 00:0f: driver attached
[ 0.304392] PCI: Bridge: 0000:00:06.0
[ 0.304394] IO window: b000-bfff
[ 0.304396] MEM window: 0xfe700000-0xfe7fffff
[ 0.304398] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
[ 0.304400] PCI: Bridge: 0000:00:1c.0
[ 0.304401] IO window: disabled.
[ 0.304403] MEM window: disabled.
[ 0.304406] PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff
[ 0.304409] PCI: Bridge: 0000:00:1c.3
[ 0.304410] IO window: disabled.
[ 0.304413] MEM window: 0xfea00000-0xfeafffff
[ 0.304415] PREFETCH window: disabled.
[ 0.304419] PCI: Bridge: 0000:00:1c.4
[ 0.304420] IO window: d000-dfff
[ 0.304423] MEM window: 0xfe900000-0xfe9fffff
[ 0.304425] PREFETCH window: disabled.
[ 0.304429] PCI: Bridge: 0000:00:1c.5
[ 0.304430] IO window: c000-cfff
[ 0.304433] MEM window: 0xfe800000-0xfe8fffff
[ 0.304435] PREFETCH window: disabled.
[ 0.304439] PCI: Bridge: 0000:00:1e.0
[ 0.304441] IO window: e000-efff
[ 0.304444] MEM window: 0xfeb00000-0xfebfffff
[ 0.304446] PREFETCH window: 0x00000000f0000000-0x00000000f00fffff
[ 0.304455] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.304458] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 0.304469] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.304472] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.304484] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 0.304487] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 0.304498] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.304500] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 0.304511] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
[ 0.304514] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 0.304521] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.304537] NET: Registered protocol family 2
[ 0.340169] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.340851] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.342859] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.343189] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.343191] TCP reno registered
[ 0.352201] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
[ 0.504051] Switched to high resolution mode on CPU 0
[ 0.546084] it is
[ 0.750778] Freeing initrd memory: 7038k freed
[ 0.520188] audit: initializing netlink socket (disabled)
[ 0.520199] type=2000 audit(1218308733.752:1): initialized
[ 0.520427] Total HugeTLB memory allocated, 0
[ 0.520486] VFS: Disk quotas dquot_6.5.1
[ 0.520504] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.520559] io scheduler noop registered
[ 0.520560] io scheduler anticipatory registered
[ 0.520561] io scheduler deadline registered
[ 0.520568] io scheduler cfq registered (default)
[ 0.520670] pci 0000:01:00.0: Boot video device
[ 0.520733] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 0.520749] assign_interrupt_mode Found MSI capability
[ 0.520765] Allocate Port Service[0000:00:06.0:pcie00]
[ 0.520813] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.520833] assign_interrupt_mode Found MSI capability
[ 0.520855] Allocate Port Service[0000:00:1c.0:pcie00]
[ 0.520878] Allocate Port Service[0000:00:1c.0:pcie02]
[ 0.520932] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 0.520953] assign_interrupt_mode Found MSI capability
[ 0.520975] Allocate Port Service[0000:00:1c.3:pcie00]
[ 0.520997] Allocate Port Service[0000:00:1c.3:pcie02]
[ 0.521050] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 0.521071] assign_interrupt_mode Found MSI capability
[ 0.521093] Allocate Port Service[0000:00:1c.4:pcie00]
[ 0.521115] Allocate Port Service[0000:00:1c.4:pcie02]
[ 0.521170] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 0.521191] assign_interrupt_mode Found MSI capability
[ 0.521213] Allocate Port Service[0000:00:1c.5:pcie00]
[ 0.521234] Allocate Port Service[0000:00:1c.5:pcie02]
[ 0.522880] Real Time Clock Driver v1.12ac
[ 0.522994] hpet_resources: 0xfed00000 is busy
[ 0.523029] Linux agpgart interface v0.103
[ 0.523031] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 0.523127] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.523258] pnp: the driver 'serial' has been registered
[ 0.523419] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.523446] serial 00:0c: driver attached
[ 0.523938] brd: module loaded
[ 0.523977] input: Macintosh mouse button emulation as /class/input/input0
[ 0.524032] pnp: the driver 'i8042 kbd' has been registered
[ 0.524058] pnp: the driver 'i8042 aux' has been registered
[ 0.524100] pnp: the driver 'i8042 kbd' has been unregistered
[ 0.524117] pnp: the driver 'i8042 aux' has been unregistered
[ 0.524118] PNP: No PS/2 controller found. Probing ports directly.
[ 0.759300] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.759303] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.776234] mice: PS/2 mouse device common for all mice
[ 0.776260] cpuidle: using governor ladder
[ 0.776262] cpuidle: using governor menu
[ 0.776482] TCP cubic registered
[ 0.776488] NET: Registered protocol family 1
[ 0.776494] NET: Registered protocol family 17
[ 0.776565] registered taskstats version 1
[ 0.776642] Freeing unused kernel memory: 372k freed
[ 0.823729] ACPI: SSDT CFF7E0D0, 0277 (r1 DpgPmm P001Ist 11 INTL 20060113)
[ 0.823946] ACPI: ACPI0007:00 is registered as cooling_device0
[ 0.824221] ACPI: SSDT CFF7E350, 0277 (r1 DpgPmm P002Ist 12 INTL 20060113)
[ 0.824420] ACPI: ACPI0007:01 is registered as cooling_device1
[ 0.975995] USB Universal Host Controller Interface driver v3.0
[ 0.976021] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.976027] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 0.976030] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.976125] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.976149] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
[ 0.976227] usb usb1: configuration #1 chosen from 1 choice
[ 0.976241] hub 1-0:1.0: USB hub found
[ 0.976244] hub 1-0:1.0: 2 ports detected
[ 1.006309] Uniform Multi-Platform E-IDE driver
[ 1.006312] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 0.843262] Floppy drive(s): fd0 is 1.44M
[ 1.080167] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.080169] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.080171] usb usb1: Product: UHCI Host Controller
[ 1.080173] usb usb1: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 1.080174] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.080208] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 1.080214] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 1.080216] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.080247] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 1.080269] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
[ 1.080331] usb usb2: configuration #1 chosen from 1 choice
[ 1.080345] hub 2-0:1.0: USB hub found
[ 1.080348] hub 2-0:1.0: 2 ports detected
[ 0.859696] FDC 0 is a post-1991 82077
[ 1.140143] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.140145] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.140147] usb usb2: Product: UHCI Host Controller
[ 1.140149] usb usb2: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 1.140150] usb usb2: SerialNumber: 0000:00:1a.1
[ 1.140173] ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 1.140179] PCI: Setting latency timer of device 0000:00:1a.2 to 64
[ 1.140182] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.140219] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[ 1.140239] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000ac00
[ 1.140299] usb usb3: configuration #1 chosen from 1 choice
[ 1.140313] hub 3-0:1.0: USB hub found
[ 1.140316] hub 3-0:1.0: 2 ports detected
[ 1.164140] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.164142] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.164144] usb usb3: Product: UHCI Host Controller
[ 1.164146] usb usb3: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 1.164147] usb usb3: SerialNumber: 0000:00:1a.2
[ 1.164226] ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 0.920079] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[ 0.920079] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 0.920079] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.920079] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 4
[ 0.923663] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.923667] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 0.923669] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe6ffc00
[ 0.936086] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 0.936160] usb usb4: configuration #1 chosen from 1 choice
[ 0.936182] hub 4-0:1.0: USB hub found
[ 0.936188] hub 4-0:1.0: 6 ports detected
[ 1.208099] firewire_ohci: Added fw-ohci device 0000:06:03.0, OHCI version 1.0
[ 0.976133] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.976136] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.976138] usb usb4: Product: EHCI Host Controller
[ 0.976139] usb usb4: Manufacturer: Linux 2.6.25-2-amd64 ehci_hcd
[ 0.976141] usb usb4: SerialNumber: 0000:00:1a.7
[ 0.976170] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 0.976177] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 0.976180] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.976212] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 0.983600] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.983604] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 0.983609] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe6ff800
[ 0.996090] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 0.996169] usb usb5: configuration #1 chosen from 1 choice
[ 0.996190] hub 5-0:1.0: USB hub found
[ 0.996200] hub 5-0:1.0: 6 ports detected
[ 1.012138] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.012141] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.012143] usb usb5: Product: EHCI Host Controller
[ 1.012144] usb usb5: Manufacturer: Linux 2.6.25-2-amd64 ehci_hcd
[ 1.012146] usb usb5: SerialNumber: 0000:00:1d.7
[ 1.276098] ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 1.276098] skge 1.13 addr 0xfebfc000 irq 18 chip Yukon-Lite rev 9
[ 1.276098] skge eth0: addr 00:22:15:05:df:2a
[ 1.276098] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 1.276098] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 1.276098] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.276098] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.276098] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
[ 1.276098] usb usb6: configuration #1 chosen from 1 choice
[ 1.276098] hub 6-0:1.0: USB hub found
[ 1.276098] hub 6-0:1.0: 2 ports detected
[ 1.276098] No dock devices found.
[ 1.279019] SCSI subsystem initialized
[ 1.282499] libata version 3.00 loaded.
[ 1.290060] udev: renamed network interface eth0 to eth1
[ 1.340164] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.340167] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.340169] usb usb6: Product: UHCI Host Controller
[ 1.340170] usb usb6: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 1.340172] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.340198] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 1.340206] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 1.340208] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.340242] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.340261] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
[ 1.340323] usb usb7: configuration #1 chosen from 1 choice
[ 1.340338] hub 7-0:1.0: USB hub found
[ 1.340341] hub 7-0:1.0: 2 ports detected
[ 1.360114] hub 5-0:1.0: unable to enumerate USB device on port 1
[ 1.364153] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.364155] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.364157] usb usb7: Product: UHCI Host Controller
[ 1.364158] usb usb7: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 1.364160] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.364181] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 1.364186] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 1.364189] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.364227] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.364245] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
[ 1.364303] usb usb8: configuration #1 chosen from 1 choice
[ 1.364316] hub 8-0:1.0: USB hub found
[ 1.364323] hub 8-0:1.0: 2 ports detected
[ 1.392155] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.392158] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.392160] usb usb8: Product: UHCI Host Controller
[ 1.392161] usb usb8: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 1.392163] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.392783] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 1.392791] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 1.392812] sky2 0000:02:00.0: v1.21 addr 0xfe8fc000 irq 17 Yukon-EC Ultra (0xb4) rev 3
[ 1.394023] sky2 eth0: addr 00:22:15:05:05:49
[ 1.394043] ahci 0000:03:00.0: version 3.0
[ 1.394055] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 1.394067] ahci 0000:03:00.0: controller can't do NCQ, turning off CAP_NCQ
[ 1.394068] ahci 0000:03:00.0: MV_AHCI HACK: port_map 7 -> 3
[ 1.412145] firewire_core: created device fw0: GUID 001e8c000147f5c7, S400
[ 1.160103] usb 5-2: new high speed USB device using ehci_hcd and address 3
[ 1.501012] usb 5-2: configuration #1 chosen from 1 choice
[ 1.501192] usb 5-2: New USB device found, idVendor=059f, idProduct=0651
[ 1.501194] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.501195] usb 5-2: Product: LaCie Hard Drive USB
[ 1.501196] usb 5-2: Manufacturer: LaCie
[ 1.501197] usb 5-2: SerialNumber: 10000E000D3E70EC
[ 1.511765] Initializing USB Mass Storage driver...
[ 1.572128] hub 5-0:1.0: unable to enumerate USB device on port 4
[ 1.604124] usb 5-5: new high speed USB device using ehci_hcd and address 5
[ 1.212098] usb 5-5: configuration #1 chosen from 1 choice
[ 1.212098] usb 5-5: New USB device found, idVendor=03f0, idProduct=2b17
[ 1.212098] usb 5-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.212098] usb 5-5: Product: HP LaserJet 1020
[ 1.212098] usb 5-5: Manufacturer: Hewlett-Packard
[ 1.212098] usb 5-5: SerialNumber: JL14BW7
[ 1.684153] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 3 ports 3 Gbps 0x3 impl IDE mode
[ 1.684156] ahci 0000:03:00.0: flags: 64bit stag led pmp slum part
[ 1.684161] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 1.684266] scsi0 : ahci
[ 1.684302] scsi1 : ahci
[ 1.684328] scsi2 : ahci
[ 1.684346] ata1: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd00 irq 16
[ 1.684348] ata2: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd80 irq 16
[ 1.684349] ata3: DUMMY
[ 1.276107] usb 6-1: new low speed USB device using uhci_hcd and address 2
[ 1.709761] usb 6-1: configuration #1 chosen from 1 choice
[ 1.712769] usb 6-1: New USB device found, idVendor=09da, idProduct=021f
[ 1.712771] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.712772] usb 6-1: Product: RF USB Receiver
[ 1.712773] usb 6-1: Manufacturer: A4Tech
[ 1.784146] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.816137] usb 7-2: new low speed USB device using uhci_hcd and address 2
[ 1.384123] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.384161] ata_piix 0000:00:1f.2: version 2.12
[ 1.384179] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 1.384183] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.384214] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 1.384247] scsi3 : ata_piix
[ 1.384274] scsi4 : ata_piix
[ 1.388961] ata4: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 19
[ 1.388964] ata5: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 19
[ 1.844134] usb 7-2: configuration #1 chosen from 1 choice
[ 1.844360] usb 7-2: New USB device found, idVendor=0dc6, idProduct=3401
[ 1.844361] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.844363] usb 7-2: Product: SCISSORS Keyboard
[ 1.844364] usb 7-2: Manufacturer:
[ 1.888194] scsi5 : SCSI emulation for USB Mass Storage devices
[ 1.464113] usb-storage: device found at 3
[ 1.464113] usb-storage: waiting for device to settle before scanning
[ 1.888260] usbcore: registered new interface driver usb-storage
[ 1.888262] USB Mass Storage support registered.
[ 1.888275] usbcore: registered new interface driver hiddev
[ 1.902886] input: A4Tech RF USB Receiver as /class/input/input1
[ 1.932162] input,hidraw0: USB HID v1.11 Keyboard [A4Tech RF USB Receiver] on usb-0000:00:1d.0-1
[ 1.536118] input: A4Tech RF USB Receiver as /class/input/input2
[ 1.556149] input,hidraw1: USB HID v1.11 Mouse [A4Tech RF USB Receiver] on usb-0000:00:1d.0-1
[ 1.570981] input: SCISSORS Keyboard as /class/input/input3
[ 1.584142] input,hidraw2: USB HID v1.00 Keyboard [ SCISSORS Keyboard] on usb-0000:00:1d.1-2
[ 1.584154] usbcore: registered new interface driver usbhid
[ 1.584157] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 1.636167] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.652976] ata4.00: ATA-7: WDC WD1500ADFD-00NLR5, 21.07QR5, max UDMA/133
[ 1.652979] ata4.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.652996] ata4.01: ATAPI: ATAPI DVD A DH16A1L, KH3B, max UDMA/100
[ 2.056147] ata4.00: configured for UDMA/133
[ 2.068327] ata4.01: configured for UDMA/100
[ 1.704168] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.716129] ata5.00: ATA-8: WDC WD10EACS-00ZJB0, 01.01B01, max UDMA/133
[ 1.716129] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.088149] ata5.01: ATA-8: ST3500620AS, SD36, max UDMA/133
[ 2.088149] ata5.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.716129] ata5.00: configured for UDMA/133
[ 2.096150] ata5.01: configured for UDMA/133
[ 1.720778] scsi 3:0:0:0: Direct-Access ATA WDC WD1500ADFD-0 21.0 PQ: 0 ANSI: 5
[ 1.721953] scsi 3:0:1:0: CD-ROM ATAPI DVD A DH16A1L KH3B PQ: 0 ANSI: 5
[ 1.722052] scsi 4:0:0:0: Direct-Access ATA WDC WD10EACS-00Z 01.0 PQ: 0 ANSI: 5
[ 1.722112] scsi 4:0:1:0: Direct-Access ATA ST3500620AS SD36 PQ: 0 ANSI: 5
[ 1.722157] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19
[ 1.722160] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.722183] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 1.722205] scsi6 : ata_piix
[ 1.722231] scsi7 : ata_piix
[ 1.723157] ata6: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
[ 1.723160] ata7: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
[ 1.784154] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.132152] ata6.00: ATA-8: ST3500620AS, SD36, max UDMA/133
[ 2.132152] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.792134] ata6.00: configured for UDMA/133
[ 1.828148] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.832178] scsi 6:0:0:0: Direct-Access ATA ST3500620AS SD36 PQ: 0 ANSI: 5
[ 1.842206] Driver 'sr' needs updating - please use bus_type methods
[ 2.160493] Driver 'sd' needs updating - please use bus_type methods
[ 2.162839] sd 3:0:0:0: [sda] 293046768 512-byte hardware sectors (150040 MB)
[ 1.847979] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.847981] Uniform CD-ROM driver Revision: 3.20
[ 1.848010] sr 3:0:1:0: Attached scsi CD-ROM sr0
[ 2.166003] sd 3:0:0:0: [sda] Write Protect is off
[ 2.166004] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.166019] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.166048] sd 3:0:0:0: [sda] 293046768 512-byte hardware sectors (150040 MB)
[ 2.166054] sd 3:0:0:0: [sda] Write Protect is off
[ 2.166056] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.166067] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.166069] sda: sda1 sda2 <<5>sd 3:0:0:0: Attached scsi generic sg0 type 0
[ 1.858804] sr 3:0:1:0: Attached scsi generic sg1 type 5
[ 1.858815] scsi 4:0:0:0: Attached scsi generic sg2 type 0
[ 1.858827] scsi 4:0:1:0: Attached scsi generic sg3 type 0
[ 1.858838] scsi 6:0:0:0: Attached scsi generic sg4 type 0
[ 2.179120] sda5 sda6 sda7 sda8 > sda3
[ 1.893919] sd 3:0:0:0: [sda] Attached SCSI disk
[ 1.893949] sd 4:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
[ 1.893957] sd 4:0:0:0: [sdb] Write Protect is off
[ 1.893958] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.893970] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.893997] sd 4:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
[ 1.894004] sd 4:0:0:0: [sdb] Write Protect is off
[ 1.894005] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.894017] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.894018] sdb: sdb1
[ 1.902845] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 1.902889] sd 4:0:1:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
[ 1.902900] sd 4:0:1:0: [sdc] Write Protect is off
[ 1.902902] sd 4:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.902920] sd 4:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.902956] sd 4:0:1:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
[ 1.902966] sd 4:0:1:0: [sdc] Write Protect is off
[ 1.902968] sd 4:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.902986] sd 4:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.902987] sdc: sdc1
[ 1.904530] sd 4:0:1:0: [sdc] Attached SCSI disk
[ 1.904573] sd 6:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB)
[ 1.904588] sd 6:0:0:0: [sdd] Write Protect is off
[ 1.904589] sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.904601] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.904625] sd 6:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB)
[ 1.904632] sd 6:0:0:0: [sdd] Write Protect is off
[ 1.904633] sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.904645] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.904646] sdd: sdd1
[ 1.907858] sd 6:0:0:0: [sdd] Attached SCSI disk
[ 2.454377] PM: Starting manual resume from disk
[ 2.153064] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 2.153409] SGI XFS Quota Management subsystem
[ 2.490435] XFS mounting filesystem sda8
[ 2.200160] Starting XFS recovery on filesystem: sda8 (logdev: internal)
[ 2.229461] Ending XFS recovery on filesystem: sda8 (logdev: internal)
[ 3.461773] input: Power Button (FF) as /class/input/input4
[ 3.512272] ACPI: Power Button (FF) [PWRF]
[ 3.512324] input: Power Button (CM) as /class/input/input5
[ 3.572269] ACPI: Power Button (CM) [PWRB]
[ 3.781856] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17
[ 3.781866] usbcore: registered new interface driver usblp
[ 3.894772] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 3.894781] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 3.894797] ath5k_pci 0000:04:00.0: registered as 'phy0'
[ 4.904777] ath5k phy0: failed to resume the MAC Chip
[ 4.904844] ACPI: PCI interrupt for device 0000:04:00.0 disabled
[ 4.904850] ath5k_pci: probe of 0000:04:00.0 failed with error -5
[ 4.908541] usb-storage: device scan complete
[ 5.292204] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
[ 4.912452] scsi 5:0:0:0: Direct-Access SEAGATE ST3500830A 3.AA PQ: 0 ANSI: 2
[ 5.304807] sd 5:0:0:0: [sde] 976773168 512-byte hardware sectors (500108 MB)
[ 5.315305] sd 5:0:0:0: [sde] Write Protect is off
[ 5.315307] sd 5:0:0:0: [sde] Mode Sense: 53 00 00 08
[ 5.315309] sd 5:0:0:0: [sde] Assuming drive cache: write through
[ 5.316302] sd 5:0:0:0: [sde] 976773168 512-byte hardware sectors (500108 MB)
[ 5.317182] sd 5:0:0:0: [sde] Write Protect is off
[ 5.317183] sd 5:0:0:0: [sde] Mode Sense: 53 00 00 08
[ 5.317184] sd 5:0:0:0: [sde] Assuming drive cache: write through
[ 5.317213] sde: sde1
[ 5.321342] sd 5:0:0:0: [sde] Attached SCSI disk
[ 5.321366] sd 5:0:0:0: Attached scsi generic sg5 type 0
[ 5.007541] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 5.007557] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 5.288615] ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 5.288631] PCI: Setting latency timer of device 0000:01:00.1 to 64
[ 6.260914] Adding 976440k swap on /dev/sda3. Priority:-1 extents:1 across:976440k
[ 7.384195] loop: module loaded
[ 7.658130] kjournald starting. Commit interval 5 seconds
[ 7.665222] EXT3 FS on sda1, internal journal
[ 7.665224] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.416486] XFS mounting filesystem sda6
[ 7.744504] Starting XFS recovery on filesystem: sda6 (logdev: internal)
[ 7.448489] Ending XFS recovery on filesystem: sda6 (logdev: internal)
[ 7.772506] XFS mounting filesystem sda5
[ 7.788507] Ending clean XFS mount for filesystem: sda5
[ 7.816509] XFS mounting filesystem sda7
[ 7.532495] Starting XFS recovery on filesystem: sda7 (logdev: internal)
[ 7.852511] Ending XFS recovery on filesystem: sda7 (logdev: internal)
[ 8.496555] sky2 eth0: enabling interface
[ 9.820194] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 10.139575] pnp: the driver 'parport_pc' has been registered
[ 10.536752] lp: driver loaded but no devices found
[ 10.569432] ppdev: user-space parallel port driver
[ 10.333982] NET: Registered protocol family 10
[ 10.334269] lo: Disabled Privacy Extensions
[ 11.436736] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 12.890035] Bluetooth: Core ver 2.11
[ 12.890355] NET: Registered protocol family 31
[ 12.890357] Bluetooth: HCI device and connection manager initialized
[ 12.890359] Bluetooth: HCI socket layer initialized
[ 12.898349] Bluetooth: L2CAP ver 2.9
[ 12.898351] Bluetooth: L2CAP socket layer initialized
[ 12.934621] Bluetooth: RFCOMM socket layer initialized
[ 12.934626] Bluetooth: RFCOMM TTY layer initialized
[ 12.934627] Bluetooth: RFCOMM ver 1.8
[ 13.251971] skge eth1: enabling interface
[ 13.255475] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 15.857015] eth0: no IPv6 routers present
[ 18.020759] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 24.889420] fuse init (API version 7.9)
[ 166.794592] Machine check events logged

moze byc tak skompilowac nowe 2.6.26 z odpowiednimi modulami ??
szuka rozwiazania d otego ACPI i chyba sie nie obedzie bez kompilacji right ??Rafal "Rudy" S. edytował(a) ten post dnia 09.08.08 o godzinie 21:34
Link do wypowiedziLink

konto usunięte

Temat: debian 2.6.25-2-amd64 i dyski IDE

Tomasz Grzelak:
pierwsze, co bym zrobił, to lsmod dla obu kerneli i porównałbym, czy nie brakuje jakiego modułu w systemie pracującym na jądrze, spod którego nie widzisz tego dysku IDE (moduł do obsługi IDE załadowany?)

pzdr.
no to tez bede musial sprawdzic, wydrukowac najlepiej bo jak patrze na to wszystkie to mi sie w oczach mieni :)

EDIT:
sprawdzilem i w 2.6.25 jest wiecej tego o zaledwie 5 sztuk, wiec co bylo zaladowane 2.6.24, jest tez 2.6.25, hmmmRafal "Rudy" S. edytował(a) ten post dnia 09.08.08 o godzinie 20:29
Link do wypowiedziLink

konto usunięte

Temat: debian 2.6.25-2-amd64 i dyski IDE

Zaraz, sekunda - 2 dmesgu jest 5 dysków o nomeklaturze sd(a-e). Zakładam że to Twoje wszystkie.
Proponowałbym sprawdzić udevs rules (/etc/udev/rules.d) - dlaczego nie sa widoczne dla fdiska.
Link do wypowiedziLink

konto usunięte

Temat: debian 2.6.25-2-amd64 i dyski IDE

nawet jest sd (a-f) bo jeden na usb
niestety w udev nic takiego szczegolnego nie widac, zeby wskazywalo na to ze w fdisku widac dyski SATA, a IDE nie
Link do wypowiedziLink
Tomasz Grzelak

Tomasz Grzelak Data Networking
Specialist, Amway
Business Centre
Europe

Temat: debian 2.6.25-2-amd64 i dyski IDE

Rafal "Rudy" S.:
no to tez bede musial sprawdzic, wydrukowac najlepiej bo jak patrze na to wszystkie to mi sie w oczach mieni :)

EDIT:
sprawdzilem i w 2.6.25 jest wiecej tego o zaledwie 5 sztuk, wiec co bylo zaladowane 2.6.24, jest tez 2.6.25, hmmmRafal "Rudy" S. edytował(a) ten post dnia 09.08.08 o godzinie 20:29

hmm... a te jądra są dystrybucyjne czy self-compiled? (może czegoś zapomniałeś dołączyć do jądra podczas konfiguracji?... bywa ;) )

tak czy owak, może spróbujesz nowszego 2.6.26?
Link do wypowiedziLink

konto usunięte

Temat: debian 2.6.25-2-amd64 i dyski IDE

Tomasz Grzelak:
Rafal "Rudy" S.:
no to tez bede musial sprawdzic, wydrukowac najlepiej bo jak patrze na to wszystkie to mi sie w oczach mieni :)

EDIT:
sprawdzilem i w 2.6.25 jest wiecej tego o zaledwie 5 sztuk, wiec co bylo zaladowane 2.6.24, jest tez 2.6.25, hmmmRafal "Rudy" S. edytował(a) ten post dnia 09.08.08 o godzinie 20:29

hmm... a te jądra są dystrybucyjne czy self-compiled? (może czegoś zapomniałeś dołączyć do jądra podczas konfiguracji?... bywa ;) )

tak czy owak, może spróbujesz nowszego 2.6.26?
dystrybucyjne
ale wczoraj probowalem robic 2.6.26 z odpowiednimi modulami do mojej plyty, wg poradnika i niestety PANIC.

A ja chcialem tylko kupic sobie dobra plyte :)
Link do wypowiedziLink

konto usunięte

Temat: debian 2.6.25-2-amd64 i dyski IDE

Z nie zaszła zmiana w wersji 2.6.25 kernela polegająca na możliwości mapowania IDE na SATA. Wówczas dyski są widoczne sd*. Jak możesz wrzuć gdzieś config kernela.
Link do wypowiedziLink

konto usunięte

Temat: debian 2.6.25-2-amd64 i dyski IDE

Łukasz Byczyński:
Z nie zaszła zmiana w wersji 2.6.25 kernela polegająca na możliwości mapowania IDE na SATA. Wówczas dyski są widoczne sd*. Jak możesz wrzuć gdzieś config kernela.
z tego co wiem to bylo to juz wczesniej, bo 2.6.24 wszysko pokazuje sd*.

Jak pisze w ludzmi to widze ze nie tylko ja mam proglem.
Narazie lipnie jest z supportem ahci i innymi rzeczami (zalezy od od dystrybucji i jak widac po mojej z rozmowie z innymi ludzmi tez od plyty P5Q-E i P5Q-Deluxe - niby to samo prawie), ktore znajduja sie na plytach opartyhc o chipset p45.
Link do wypowiedziLink

konto usunięte

Temat: debian 2.6.25-2-amd64 i dyski IDE

Zmiana była wcześniej - bodajże w 2.6.19.
Rudy, jaka to właściwie płyta, i jak masz ustawione dyski, na ahci właśnie ?
Link do wypowiedziLink

konto usunięte

Temat: debian 2.6.25-2-amd64 i dyski IDE

Marcin Bojko:
Zmiana była wcześniej - bodajże w 2.6.19.
Rudy, jaka to właściwie płyta, i jak masz ustawione dyski, na ahci właśnie ?
juz sobie poradzilem.
trzeba wylaczyc ahci w biosie, bo inzcej mi nie chce sie bootowac.
potem trzeba skompilowac jajo z paroma opcjami dla plyty (Asus P5Q-E - jadnie opisane w wiki dla gentoo) i wtedy wlaczyc znowu w biosie ahci i chula.

Wszystko ladnie chulalo do piatku, na gentoo i debianie, az do momentu jak wlozylem pendrive'a i chcialem film skopiowac.
Debian sie zawiesic i wszystko szlak trafilo :((, ale po weekendowych walkach udalo sie co nie co ponaprawiac.

Dzieki za zainteresowanie.
Link do wypowiedziLink
« Wróć do tematów
Odpowiedz

Podobne tematy


Następna dyskusja:

Samba i debian etch




Wyślij zaproszenie do
Anuluj